Applied Modern 20th Century Aether Science

Author: Robert Adams, 1999

1. INTRODUCTION
• Tapping natures clean inexhaustible energy with the Adams Technologies
• For greather Marine safety
2. INTRODUCTION INTO APPLIED AETHER ENERGY SCIENCE
3. ON THE PHENOMENA OF WATTLESS (CURRENTLESS) POWER
4. ELECTRICAL ENERGY GENERATION AND THE VITAL ROLE PLAYED BY TEMPERATURE AND TIME FACTORS WHEN CALCULATING MACHINE PERFORMANCE
5. TRANSLOCATING POTENTIAL GRADIENT TO THE MOTOR
6. UNITY, ZERO POINT, OVER UNITY, OVER 100% AND VARIOUS OTHER DEFINITIONS OF DESCRIBING PERFORMANCE OF NEW ENERGY DEVICES
7. THE ADAMS THERMO-MOTOR GENERATOR
• Adams Megawatt Generator
8. OHMS LAW
9. INPUT POWER MEASUREMENT AND ITS SIGNIFICANCE IN THE ADAMS TECHNOLOGIES
10. THE ADAMS TRIPLEX AETHERIC ENERGY MOTOR GENERATOR
11. REVELATION OF THE MYTHS OF 'UNITY' AND BEYOND
12. ON THE MATTER OF EXCESS HEAT MANIFESTATION
13. THE ENERGY METAMORPHOSIS

INTRODUCTION

Composed/Written by Margaret-Anne Adams

Our Universe, and beyond is among other awesome things a vast and infinite ocean of energy clean free-energy. It is energy eternal, a gift from the infinite intelligent power of God the Creator of all things. This energy is all out there on a sea waiting for us to set sail upon -and it is all "free".

The entire cosmos and all its content, whether it be a neutron, a grain of sand, or a celestial body, is in perpetual motion - Life itself as we know it, whether cosmic or earthly is no more or less than a constant state of generation and decay, of change, of perpetual motion - Even the mind of man is irretrievably caught up within this same eddy of perpetual motion - One of the most stunning and intriguing examples of perpetual motion is that of the workings of the human mind - not the brain. The brain is physical and can be seen visually and touched. The mind however is physically invisible, incorporeal, untouchable - and yet it is in a constant state of perpetual motion, the ideas of mankind for instance are in a constant interchange with each other: old ones exchanging for new ones, the evolution of thought perpetually in movement ad-infinitum, a never ending state of generation and decay, decay and generation but always moving on.

Time itself is the most convincing argument of all for perpetual motion- The second within which I utter a word, is both here and gone at the same instant and before one can even stop to think about that, many more future seconds have elapsed, once again ad-infinitum "perpetual motion", also always moving onwards.

So I say to all whose thoughts on the subject of New Science are being disturbed or rattled ignore all this pish from those sitting in their age-old ivory towers stubbornly clinging to their insecurities by way of melodrama and pseudo ignorance these guys are losers. Cast them away from you because their journey down the gurgler is well commenced - Join the burgeoning society of environmentalists and natural scientists the world over whose words are, by the hour, pure evidence and total proof that the world we have all been so nonchalantly living in these past 4-5 decades has been run and governed by the wrong people.

Down through the annals of history, through the Ghengis Khans, the Caesars of the Roman Empire, the Popes, Churches, two world wars and the astronomically uncountable paths of pain that mankind has trod in his infancy These chapters will have nothing on the hell he will unleash upon himself if he does not very soon conquer the past dogmatism and ignorance with which his chains now incarcerate him - He must not fear the future, nor the path ahead most of all he must not fear the way in which he is to tread this path

Departure time has arrived - don't miss the sailing boat.

Tapping natures clean inexhaustible energy with the Adams Technologies

Imagine your own plant at home, business, factory, milking shed, etc., to name but a few of the scores of sites and applications for such a device. Sounds like a dream?

No, it is no dream. Development of such a technology has been on-going right here in New Zealand in the Bay of Plenty for some years now by an internationally recognized scientist by the name of Dr. Robert Adams of Aethmogen Technologies.

Unprecedented progress is underway worldwide on new energy devices. Such devices will one day in the near future pave the way to the time when we will see an end to pollution. Such devices will play an enormous role in the doing away with the monstrosities we call power stations which presently interfere with our waterways and, especially in the case of the coal and oil fired stations polluting the air we breathe. Hydro stations with their pylons and substations straddling the countryside will meet a similar fate. The time will come when grid systems will not be sustainable even to the most affluent of nations and the world will have to turn to simpler and more cost effictive alternatives. Power stations, just as the computer industry has done, will downsize quite dramatically and continue to do so rapidly until establishments such as hospitals, universities, factories, etc., will no longer be their guests. Eventually the smaller new energy devices will accommodate these guests and they will become self-sustaining as will individual residents who will be able to own and operate their own power supply at a "one-off" cost and store these individual units quite comfortably in their basements or garages.

Dr. Adams has authored a new book on his own technologies titled "Special Update 2001 Edition of Applied Modern 20th Century Aether Science". This book covers the subjects of nature and pollution, politics, the environment, hte scientific establishment with its false teachings, aether energy technologies ond devices, modern calorimetric aether power measurement techniques, thermo-moter-generators, aetheric energy from mosfets and magnets, conventional electric motors and generators, etc.

Dr. Adams has, for over fifty years, had serious concerns over environmental pollution, having himself been involved at the coal face with power plants in New Zealand in his younger years. This concern has underwritten a virtual lifetime of work researching alternative energy. His concerns for his own country go deep - he states:

The universal pace for economical and, more important, clean, pollution free energy has seen the passing of laws in California USA requiring that ten percent of all cars sold, starting in the year 2003, be zero emission vehicles. Other American States have followed suit, creating a potential market for fuel free automation. The race has well and truly begun in the new energy arena with the burgeoning European and Asian laboratories following the lead and turning their attentions from the purification of fossil fuels to the interrogation of alternative energy sources.

The electrical machine technology, developed in New Zealand by Dr. Adams of Aethmogen Technologies, in its various invented forms, is ideally suited to application in rural areas where there are expensive line charges for power supply, or no power access at all, as in remote locations.

The system can also be adapted to the provision of steam power with which to run turbines, steam central heating systems in homes, business complexes, industrial plants, hospitals, hotels, airports, etc.

The system is adaptable to all motive power requirements, i.e., from marine applications right on through to agricultural, horticultural, fisheries, forestry, major earthworks, aeronautical and aerospace projects. Its applications are widespread, land, sea and air.

For greather Marine safety

A boon to all boat owners and operators, whether their craft be dinghys, launches, yachts, tri-marans, luxury or ocean liner vessels, clean safe energy supply is now available for motive power, power for heating water, with additional supply for cooking, lighting and general heating purposes on board. The dangers and risks associated with using on board fuel and gas can now be totally eliminated. This clean power of the future is safe (no risk) and does not subject the environment to any interference whatsoever. It also has the unprecendented advantage of an as yet unprocured economical dominance over all other power alternatives.

Quotation - from Dr. Harold Aspden PhD, BSc, FIEE, FIMech E, MInst P, C. Eng, C.Phys. Department of Electrical Engineering, University of Southampton, England:

Since Dr. Aspden undertook his evaluation of the Adams technology and came to the above conclusion, the development of three different machine types have been completed and are now ready for aesthetic design formats to be considered with consequent construction for production purposes to follow.

INTRODUCTION INTO APPLIED AETHER ENERGY SCIENCE

With the advent of harnessing aetheric energy with the applied Adams Technologies, it poses a difficult task to know the best possible starting point with which to describe this almost as yet virtually unknown technology in the mainstream of electrical sciences.

The decision I have taken is to commence at the grass roots, so to speak.

It all started during 1969 when I first determined to use permanent magnets to construct an electric motor generator that would defy Lenz's law and, in so doing, invent an electrical machine that would run at unity and, so too, in turn, defy certain other orthodox laws.

Before going on further, I feel you should all be aware of the reason why I decided to turn my attentions to developing a device which would display characteristics that would serve to exhibit that there were better ways of acheiving access to power or energy without recourse to man-made laws. I had long ago decided that ultimately all man-made laws required re-examination at one time or another and could never remain static in time - as time itself has constantly proved. Man-made laws, in particular those of physics and the allied sciences, have no path to follow, in that they tend to remain finite and exhibit the distinct inability to contain the characteristic of flexibility, which they must contain if they are to grow and expand at all, let alone grow and expand at the same pace of the human mind. Had the human mind taken upon itself the identity and stoliditude of these man-made Laws, the human condition would be a sad and sorry one today. Long enough had man subjected himself to the time-weary stagnant laws of physics and the electrical sciences and it seemed to me that in order for real progress to be made in this field, someone had to be brazen enough to stomach the inevitable sticks and stones and forge onwards to a totally new mentation. I had followed, throughout my many years of experience and constant studies, the works of other pioneers in other countries who had been theorising (more than experimenting in a practical sense) new ideas and hypotheses and it occured to me over and again that these scientists and inventors were trying to equate these new ideas with endless reams of unsuccessful calculations and equations based on the sacrosanct (and aging) man-made electrical and associated laws. I made up my mind that this was going to change, and change dramatically, if I was going to have anything to do with it. Many of these new pioneers, I felt, were (and are, even to this very day) trying to put new ideas up against old (and unfortunately still reigning) regimes and methods, which came into vogue long before the days of the great Leonardo da Vinci.

And so I started quietly to work according to the Laws of the Universe and Nature and along the way over the years I made some rather astonishing discoveries of my own which, at times, bowled me quite over, and still do. As time went on, empirical findings made me bold enough to come out of my shell and go public with my results of experimentation and discoveries - quietly at first. This was both good and bad for me and I was eventually forced to anticipate and indeed prepare myself for the onslaught to come. Come it did - of course!

What I was doing was an affront to every respectable teaching institution on the surface of the planet. Scores of electrical engineers and physicists bombarded me ad nauseum with the dogma, for instance, that, with my devices, I would get absolutely nowhere without closing the loop. At lectures this was one of the greater thorns in the sides of my contemporaries. Very few indeed were those attendees who gave this matter any in-depth thought at all, and those who did (brush away the cobwebs), as I lectured on, slowly nodded, quietly smiled and shouted no more (in the way people do when suddenly visited by an affliction of the dropped penny syndrome) ; they just listened with greater intensity and keen interest until the end of the lecture, when stunned murmering grew rapidly to an ever increasing buzz of heated dissertation and debate which, incidentally, rang through the lecture chambers long after I had departed. Such lectures, especially those (most) which were accompanied by at least an hour and more of question and answer sessions between the attendees and myself, were always a great joy for myself and I can say, with more than a little satisfaction, never boring for the attendees.

So it is for all my readers today to understand that, although the walk has been long, thorny and arduous at times, the journey has been one of the utmost intrigue, fulfillment and discovery wherein I have experienced many surprises myself. Red rags have turned to green lights, frustration to reward and, in the end, all quite good fun.

I describe matters now pertaining to calorimeters because, as we progress, it is found that they are vital instruments for this technology - so much so that I purport them to be the only accurate means of measuring power generated/harnessed within these devices of the Adams technologies. This fact, came to be because of the great difficulty in having to engage in applying empirical knowledge to working with this technology, as orthodox theories/methods are of no value whatsoever in the design and construction or testing of these super machines.

Late 1995 - 1996 heralded in the successful and sophisticated "Adams Thermo-motor Generator" entering the kilowatt range at greater power and performance. In addition during that period many various types of calorimeters were also designed and built by myself. Experience, intuition and empirical knowledge has since led to new discoveries and more sophisticated and accurate calorimeters.

One special unit I will mention, but briefly, as it is on the classified file, is the Equilibrium Calorimeter. Now if equal masses of copper and water are heated, for instance, over flame, for equal periods of time, the temperature of the copper rises ten times as fast as the temperature of the water, and to cause the same temperature change of the water, it would have to be heated ten times as long. This massive variance, in addition to other factors to be accounted for, results in the necessity of tedious calculations which all have their resultant and inevitable error factors.

These complex ramifications of coefficients, specific heat, thermal conductivity, convection, radiation, absorption, insulation losses, have, ad infinitum, in their path of time immemorial, created ongoing contention to this day.

To put the matter to rest for my own sake, I turned to inventing a water calorimeter that would dispense with 'calculations' and need only to rely on 'measurements'. (Measurements can be relied upon; calculations, in calorimetry involving water, can not!). This is, then, the Equilibrium Calorimeter mentioned above.

In this type of water calorimeter, a small quantity of water and a short operation time is of paramount importance. The unit itself is unique in that its load heating element heats both the water and copper vessel simultaneously and as the machine being tested operates in the kilowatt range, a state of equilibrium in the calorimeter is very rapidly reached after switch on of the machine, and remains so to boiling point or any desired temperature. The copper vessel containes only 0.5 litre of water with a boiling point time of 2.0 minutes. The fact that all componentry and water reaches equilibrium so rapidly, ensures that the resultant accuracy and performance of the unit is such that insulation loss is so low for such a minimal period of time, it is negligible and can therefore be dismissed. The end result of this calorimeter invention procludes all doubtful calculations and therefore requires but three measurements only to be taken - those of mass, temperature and time - all of which, with the application of modern measuring methods, are extremely accurate, resulting in an overall maximisation of machine/device 'zero point' performance measurement, possibly never before attained.

ON THE PHENOMENA OF WATTLESS (CURRENTLESS) POWER

Extensive variations of current are possible and are, to say the least, of considerable proportions - upwards and beyond some 70%>. As stated previously, in my recent papers, I am confident that the current can be still further reduced.

The figures indicated at the end of this chapter show clearly that there is an anomaly which appears to defy a conclusive explanation of where the missing current (according to Ohms Law) has departed to! In reality, due to the subliminal velocity of the aetheric energy gaseous flow over the surface of the windings, the current becomes "lost" and, therefore, left behind.

In 1976 I discovered the machine delivers massive heat power to an external load upwards of 600%> above input power, this power then does not register in the machine or in the line load and must therefore be calorimetrically measured. This power is known as "wattless/currentless power".

To understand this phenomenon, one must be conversant with "Tesla Aether Energy Science". Current-less power was described by Tesla in 1889 in his radiant energy transformers, but he never got around to putting it to practical use. It is to be noted, at this point, that I am the original discoverer of the phenomena of currentless power in the "Adams" motor generator.

I quote herein by Gerry Vassilatoss in his 'Secrets of Cold War Technology' published by Borderlands Sciences Research Foundation, P.O. Box 220, Bayside C.A. 95524 U.S.A. 1996, (page 38 paragraph 2):

It is impossible to comprehend this 'Tesla Technology' without considerable knowledge of the Aether. One must seek out and study the proofs, of which there are now many, that have been established by experimenters worldwide. It is a technology capable of being explained through gas dynamic analogues. The fact that even partial elimination of electrons from Aether currents takes place, indeed spells out that this is a new kind of electricity which could find no resolution in present electrical science. This new energy technology is going to change the world we live in on an immense scale.

To understand Tesla Aetheric Forces Technology, one must eliminate the notion that electrons are the working gremlins of electrostatic energies, for in this technology they are no longer the working gremlins. We are considering here an entirely different kind of electricity, endowed with totally different characteristics which, therefore, requires a new and different approach to the method of measuring the performance of any devices created as a result of the development of this technology, as the disparity between the two is immense.

An Adams D.C. Impulse Electric Motor can be designed in such a way that the succession of charge and discharge impulses develop energy of such magnitude that it may be possible to have control of the flow of conventional electricity electrons through the complex metallic lattice of the very long length of wire used in the stator system, due to its super luminal velocity, of which the gaseous pulse flows over the coil surface. This then would provide us with an electric motor that requires very little current at nominal voltage whilst yet delivering considerable power.

There are certain parameters required to be implemented which do not apply to conventional D.C. electric motors - those of repulsive impulsing operating potential, stator winding resistances, winding wire size and quantity and machine construction materials, etc. The established gaseous electrostatic electricity moves over the surface of the winding's wire at a super luminal velocity. This creates an enormous surge leaving the slower moving electrons behind and, hence, a consequent reduction in current flow is possible, according to machine parameter variables applied.

ELECTRICAL ENERGY GENERATION AND THE VITAL ROLE PLAYED BY TEMPERATURE AND TIME FACTORS WHEN CALCULATING MACHINE PERFORMANCE

In considering the above we should first look at the question of "how is electrical energy generated?" To begin with we must dispose of the myth that electromagnetic machines generate electrical energy as is taught in our schools and universities by the establishment. So called "electric generators" do not generate electric power per se. They are mechanical devices which, due to their rotational field, act as a gating mechanism, tapping the aetheric energy field within the air gap between the machine stator and rotor, and delivering that energy externally in the form known to us as 'electrical energy'. This energy is ever present (omnipresent, as previously explained) but the machine must be in motion to harness it, not generate it.

NOTE: In the interests of simplicity for the reader, however, I will continue, in this paper, to use the words "generate/generated/generator" as the words are used in their normal and general context.

In electric motors we have the interesting situation whereby we apply stored, or 'generated' electric power to supply motive force to do mechanical work. The motor is, however, also reliant on aetheric energy from the air gap of the device for rotational power.

From the foregoing, it is clearly evident that if the AETHER did not exist, as the establishment and Newtonians would have us believe, then there would be no aetheric force and, therefore, no manner of electric motor or generator would function, as there would, in turn, be no action at a distance, no lines of force, no magnetic fields and hence no Universe!

TRANSLOCATING POTENTIAL GRADIENT TO THE MOTOR

On translocating potential gradient to the charged mass in a circuit element and sourcing it via impulse to the motor, will amplify the inherent magnetic unified charged mass and, for a finite time, retard, or very nearly block off electron flow, thus precluding current flow; this is termed the relaxation time of the mass of the circuit element, i.e., in this case, the motor stators including windings. There are at least two possible methods of causing a finite delay time thereby retarding current flow within the stator element, in addition to impulsing the source - one, of using doped winding wire (at present a difficult one) and - two, in designing the stator/s by incorporating sacred geometry, i.e., PI and PHI involving the Golden Ratio.

The collector element will then become a secondary battery being used in a conventional manner to power a load, which does not affect the primary source. This power so provided in the external load is free and sourced in such a way that the prime mover source is not being brutalised as where, in conventional motors, they are designed to do just that and are, in turn, themselves brutalised with resultant high temperature and extremely poor performance. Bluntly, their role is that of destroying their own source of potential gradient and eventually destroying themselves.

There is massive trapped energy in many natural materials, especially metals. Latent magnetic energy is ever present in these materials and this energy I describe within the structures of electric motors is found to play an important role together with that of the energy harnessed from the small air gap between the rotor and stator sections; this applies to both motors and generators alike.

Power source applied to electric motors expands the ever present covert electromagnetic flux of the metal materials, i.e., the iron core and copper windings. It is not the impressed energy applied to the motor that creates the inductive field, as taught in universities and colleges alike; the magnetic flux field "already" exists in its natural state within the stator system; the application of energy into the system simply "expands" the natural latent inherent inductive energy residing therein.

This expanded inductive energy, in conjunction with the energy harnessed at the air gap between the rotor and stators, provides the driving power of the motor. The important roles played by these two sources of force have "never before" been properly highlighted. They have eluded mainstream academia and scientists alike for over a "century" in regard to their vital importance in machine design and this explains "why" electric motors have "never" been improved upon during these past 100 odd years.

The role played by these two forces require "more investigation and understanding" in the part they play in magnetism and inductance as applied to electric motors. The design parameters concerning these two forces far outweigh the importance of I²R losses.

It is incredible indeed to realise that electrical engineers and scientists in this modern age of technology are still taught to use free trapped electromagnetic energy to destroy the source of the said energy, by placing these flintstone motors across the National Grid Systems and/or battery energy sources. In this brutal way, millions of megawatts of energy is wasted daily throughout the world in the manner described above and there is no excuse for allowing such a monstrous waste to persist any longer. Every fossil fuelled and nuclear power station in the world could be shut down in the space of three years.

UNITY, ZERO POINT, OVER UNITY, OVER 100% AND VARIOUS OTHER DEFINITIONS OF DESCRIBING PERFORMANCE OF NEW ENERGY DEVICES

There is a problem with the above definitions, but that is not the fault of people like ourselves in the New Energy field - it is the fault of false teachings and mind entrenchment of the methods adapted for the performance testing of grossly inefficient conventional electric machines.

I do not subscribe to the definitions of "over 100% EFF" or "beyond unity". There can be no "beyond unity" as the totality of the Universe is Unity. This then tells us that conventional electrical machine "efficiency testing proceedures" adapted to the testing of new energy devices can only be described as bizarre and are of no substance whatsoever. New mentation must evolve whereby our new energy devices' performances are 'measured' in accordance with the truth and not with man-made laws and "presumptions" still in vogue today.

The definitions of "over unity", "beyond unity", etc., are so much in use in present day New Energy Science that in some of my writings I opted for the status quo in using such terms myself as the task of de-programming our thinking on the matter is still very much in its embryonic state. In this updated version of my writings I have made more of an effort to break the mould of using such terminology as to continuing to do so can only retard any progress and confuse the reader and young student.

THE ADAMS THERMO-MOTOR GENERATOR

This device is a super power, thermo, impulse, salient pole, open magnetic circuit, repulsion, self-starting, reluctance electric motor generator. The "Adams Triplex Aetheric Energy Motor Generator" is so named in view of its unorthodox and unusual ability to manifest considerable aetheric energy from three different areas of the machine.

The stator system, with its ability to reach high temperatures very rapidly, is designed to harness this heat from the cores of the stators via water circulation. The second source of energy is derived from loading the machine as a generator.

Temperature, material types and geometric secrets which govern the high output power and performance of the Adams Thermo-motor Generator.

This is a super power machine, the first of its kind in the world, with the capability of manifesting massive heat power internally in such a way that it precludes any damage due to heat affecting the rare earth magnets in its rotor system. The rotor is designed and engineered in such a way that it gates massive aetheric energy in the form of heat which is transferred by the rotor system to the water jacket system of the machine stators. The machine rotor carries out this operation whilst itself remaining relatively cool - at most, a few degrees above ambient - whilst the heat which is manifested on load is capable of reaching into hundreds of degrees and kilowatts of power. On account of the foregoing mastered conditions of temperature control and transfer of manifested power to the stator water jacket system, the life span of the rare earth magnets remains unchanged, i.e., no deterioration takes place. The rotor of this super power machine was invented late 1995 and perfected into a machine in early 1996.

In comparison to an orthodox machine constructed of standard materials, this machine consists of different materials in its make-up of construction, the materials of which are of specific geometric dimensions, mass, etc., and so placed geometrically inside the rotor as to gate the awesome aetheric power that is inherrent in the 1.25mm air gap of the machine and to deliver it, in the form of heat and/or electric power, to a load.

There are three sources of heat energy manifested in the Adams Thermo-motor Generator version and all three are physically isolated from each other. These three heat sources appear at :-

1. The Thermo-motor Generator, (whereby heat is transferred via water through pipes to a seperate calorimeter) ;
2. The Machine Mosfet Calorimeter, (heated by energy manifesting at the mosfet) and -
3. The machine Load Equilibrium Calorimeter (heated by the electrical loading of the machine).

The machine Load Equilibrium Calorimeter is the vital measuring instrument in the line-up, as it MEASURES the output power of the machine proper. The other two heat manifestations are by no means small and are free spin offs which can be readily harnessed.

The Adams Aetheric Energy Electric Motor-Generator Technologies, over the past ten years, have heralded in new innovations that have culminated in very significant discoveries including that of the use of certain materials not normally used in the construction of orthodox electrical machines, resulting in the manifestation of massive power, in the form of heat, from the Thermo-motor-generator designs, at undreamed of ratios of input power to output power.

There are now "proven" natural laws pertaining to energy which render the orthodox "assumptions" of the establishment down to the realms of the obsolete and, however troublesome to accept, include those contained in the hypotheses traditionally served at the banquet hall tables seated by Einstein's Relativity, Quantum Mechanics, The Laws of Thermodynamics, Lenz's Law, Ohms Law and others. The truth of the entire situation is that I, Robert G. Adams, have proved, over hundreds and thousands of hours hard labour at the laboratory benches and machine shops, with the aid of intuition and empirical knowledge, that these aetheric energies are manifesting at unity/zero point and whereby the bottom line is that there is no longer any reference point from which to base any kind of so-called "efficiency" test. So the word "efficiency", with regard to aetheric energies simply cannot possibly apply because the only way by which to calculate the "efficiency" of the omnipresent would be to draw up scales of astronomical mathematical proportions that such scales would ultimately become eternal and infinite, and totally impossible to monitor, police or keep track of. Utterly beyond the ability of mankind. And so the term "efficiency" cannot ever be applied to "aetheric energy ", or, for that matter, the technology/ies invented or created by which mankind may have the capability to gate or harness it. And so the term "efficiency", here in the case of aetheric energies, becomes a nonentity forever and a day, and I hereby lay claim to the original discovery and, indeed, acknowledgement of this "Law of Nature" and hereby designate this discovery "The Adams Law". The 'Adams Law' also encompasses many other discoveries I have made pertaining to Ohms Law, Lenz's Law, etc.

The seed of original doubt of the explanations given me from my peers in relation to magnetism, electromagnetism, inductance, magnetic radiation - became apparent to me at the age of nine years and, for some reason convinced me that there was something unaccounted for. Hence, as aforementioned, as time progressed, I made up my mind that a change had to come about and that sacrosanct orthodoxy had to be the victim of that change. Yes, difficult as it would have been for the Ceasars to comprehend, let alone possibly accept, even the mighty Rome had to fall - one day!

Adams Megawatt Generator

''.....Going back a little in history, my first experimental thermo-motor generator was invented and constructed in 1992. This was a small 5 watt machine (still in its original condition today). Various other models followed on until `1995 - 1996, when I ventured from 50 - 100 watt to 1 Kilowatt, and first saw the real signs of unity on the horizon. 1995/1996 heralded in a 7.5 kilowatt machine endowed with a unique rotor of unorthodox design features, which resulted in massive heat manifestation and which was described in papers written at that time and in my latest book, titled "Aether, Matter, Energy, Heat and the Universe".

This machine was followed by five more improved systems. This was due to the gaining of substantial empirical knowledge along the way, and of experiencing at first hand the awesome power that can be readily tapped provided, of course, the precautions were taken to control/tame this power.

Together with my calorimetric programme and the further empirical knowledge gained therein, I was then able to carry out very exacting tests within 1.75 - 2 minutes. It was during 1999 that I made some very important discoveries in relation to aetheric energy rotary machines. The most important of these discoveries was a Law of Nature which proved to me that to state "over 100% efficient" as being a claim of evidence of "unity" is a false notion. The achievement of 100% or 10,000% efficient is NOT indicative of "unity". The Adams Law of Unity (Infinity) states " a state of unity cannot exist without evidence of additive and accumulative energy generation" as stated elsewhere in my published papers of the time and my latest book.

The Adams Megawatt Generator, with it's appendage Multi Farad Megawatt Capacitor Bank, followed by the steam turbine controller/generator of the on-going rising temperature unique to the Adams Technologies, represents an awesome machine of massive power generation, and abilities of reducing machine mass of upwards of 90 ton. This machine can therefore be handled manually without the assistance of a crane or trucking. An average sized van could comfortably transport 12 - 15 of them.

It is to be understood that the Adams Megawatt Generator has passed the drawing board stage and is at present being constructed. Its components, for security reasons, are being produced at three different locations which are at considerable distance from each other, as well as being unknown to each other. The project is now nearing half way and in its entirety has been skillfully designed upon the invaluable empirical findings and discoveries over many years of research and development with laboratory prototypes.

Evolution of the design

According to Mr. Adams' autobiography, the evolution of the motor design includes these significant milestones:

1969 - Adams Switched Reluctance Motor Generator

1975 - Impulse method of charging batteries

1993 - New procedure to engineer magnetic polarity reversal

1995 - Super Power Four Pole Permanent Magnet

1996 - Mark 024 Thermo Switched Reluctance Motor

OHMS LAW

Since it is proven that the Adams Technologies, as applied to the Adams Electric Motor Generator inventions, violate OHMS LAW, the use of conventional instrumentation and of OHMS LAW itself, for evaluation of performance, results in gross errors. The heart of the problem here, lies in the fact that standard electricity, as we know it, is a totally different kind of energy to that which is directly gated from the aether, the nature of this energy being such that it does not respond to conventional electrical instrumentation, nor does it obey OHMS LAW. This orthodox instrumentation is found to be grossly in error, just as is the application of OHMS LAW itself for power measurement, simply because the basic design of the said instrumentation used INVOLVES OHMS LAW!

This then heralds in the need of an ocean of new electrical scientific teachings, in order to accommodate these new technologies into electrical engineering texts for colleges and universities. Firstly, a NEW MENTATION must take place, where teachers and students alike will need to de-programme their present knowledge of conventional electricity to that of electricity harnessed from the aether. It is time NOW for our future young student scientists and electrical and electronic engineers to study this vast new clean and inexhaustible source of energy along with its massive implications and applications.

This discovery of the VIOLATION OF OHMS LAW is monumental and unprecedented, but also goes further in that it renders all conventional digital and analogue instruments as obsolete tools for use in this new technology. Instrument manufacturers worldwide will also require to re-programme their mentation in order to enter this new dimension of technology and proceed to formulate new instrumentation with which to take the place of their predecessors. This will pose a difficult task, as the Adams Technologies have violated other so-called LAWS of science.

It is on account of the aforegoing ambiguous circumstances that I resorted to calorimetry for measuring input and output power, in doing so, dispensed with the need for any of the unreliable instrumentation or OHMS LAW itself and thus, too, as an aside, relegating obscurantism back into the realm of darkness from whence it came, since measurements made in the science of calorimetry are indisputable. Realistically, since calorimetric measurements have been proven to be the only accurate and reliable means of proving unity and power measurement, then orthodox electrical instrumentation has become dispensible in this new era of technology.

The question then arises, as it inevitable must as a natural consequence of the problem, "Do we need new instrumentation at all?", in view of the probability existing that any new design structure of such new instrumentation could create some rather insurmountable obstacles not encountered with the use of calorimetry.

INPUT POWER MEASUREMENT AND ITS SIGNIFICANCE IN THE ADAMS TECHNOLOGIES

In relation to the measuring of input power to the Adams motor generator, where the question of differentiating between the heat produced by the motor section and the heat produced by the generator section, particularly where the motor generator is one integral unit, there poses a controversial situation of "how best to calculate the measurement" if the measurement "is determined calorimetrically"?

In reality, it is irrelevant to measure the quantities of heat of either sections in any case.

I made the decision some years ago to abandon trying to differentiate between the two measurements and, in so doing, put an end to the unnecessary laborious hours spent in complex calculations by measuring total heat power and to simply consider any heat energy not harnessed as an additional loss together with other normal losses.

This is entirely acceptable for the very reason that "all" losses are of no consequence whatsoever in this technology, as the machine in question is operating in the dimension commonly known and referred to in scientific circles as "Zero Point", i.e., energy generation being "infinite" with power incrementally increasing with time, as the calorimetric graph indicates. [Ed - unprinted on web]

The machine is now in a situation whereby it is creating potentially high steam pressure to drive a turbine which, in turn, generates free electric power to drive yet another Adams motor generator by which to generate further heat, ad infinitum. This kind of evidence, in my knowledge of science, is the only method by which the violation of the Law of Conservation of Energy can be explicitly shown beyond all doubt.

I refer the reader, at this point, to an internationally recognised scientist in applied aetheric energy technologies, one Dr. Peter Lindemann of the USA, who quotes to me in correspondence of October 16 1999 :-

Now that you know, with confidence, that Ohms Law only operates within a narrow window, and that once outside this window, it begins to fail as a useful method to calculate accurately, the behaviour of certain equipment, such as your machines, surely you can now better appreciate what I have stated in the past, that we do not know what the real equivalences are between electrical work as Watt-Hours, heat work as BTUs, and mechanical work as Foot-Pounds. If we really do not know what the equivalences are, then we cannot calculate conversions between these units of measure! I really do not know how to make this point more emphatically!"

And, in further correspondence , he quotes :-

THE ADAMS TRIPLEX AETHERIC ENERGY MOTOR GENERATOR

This device is a super power, thermo, impulse, salient pole, open magnetic circuit, repulsion, self-starting, reluctance electric motor generator. The "Adams Triplex Aetheric Energy Motor Generator" is so named in view of its unorthodox and unusual ability to manifest considerable aetheric energy from three different areas of the machine.

The stator system, with its ability to reach high temperatures very rapidly, is designed to harness this heat from the cores of the stators via water circulation. The second source of energy is derived from loading the machine as a generator.

The heat in the stator system is present whether the machine is run in a no-load or loaded condition. When loaded, however, the heat in the stator system increases rapidly and "continues" to do so during the period of operation.

A further and third source of aetheric heat energy is manifested at the mosfet. This heat is also harnessed by the heating of water. This mosfet is set inside the copper storage vessel (or calorimeter) for measurement purposes.

The total heat from all three sources can reach upwards of eight (8) times the input/heat power.

A unique method of successfully transferring the heat from the stator system is water circulation within the stator cores and, as the stators are water cooled, it provides protection for the windings from burning out ; this is of paramount importance because as the machine is running "at unity" the heat manifesting at the stators "continues" to rise with time. The water so heated is circulated with the aid of an electronic pump which transports it to a holding tank/calorimeter for measurement purposes.

In addition to the unique structure of the stator system, is that of the rotor. The rotor was invented and perfected during 1996. Its materials, in addition to the magnets and the dimensions and geometrical placements of the said materials, are vital to the massive manifestation of heat that results from its structure and that of the stator system and its technological parameters. The rotor, however, playing the major role, remains the coolest part of the machine.

This machine is revolutionary and the first of its kind in the world and provides economical clean safe power. In an actual domestic application installation the machine would, of course, have a common holding hot water cylinder which would receive all three sources of the aetheric heat energies manifest within the machine componentry.

REVELATION OF THE MYTHS OF 'UNITY' AND BEYOND

Over 5 years ago I made a reference in a chapter of my book 'The Revelation of the Century' in relation to claims on "over 100% efficiency". In this book, which is still being distributed worldwide by Nexus Magazine, Publisher of Queensland, Australia, reference is made to what is erroneously termed "zero point" or "beyond unity". On page 14, second to last paragraph, I quoted:

In support of my reference, I have now expanded upon this matter in this new Second Edition 2001. Now I am going to discuss this subject in more depth, and my revelations here will no doubt shatter the minds of many electrical engineers and scientists worldwide, because they have got it all wrong!

To start with, in orthodox teachings, we have the word "efficiency" used extensively in relation to electrical machines and devices, etc. So too, we now have the definition of 'over 100% efficiency' bandied around extensively. Now, this term 'efficiency', insofar as orthodox teachings are concerned, applies only to calculations to 100% and beyond. Now that most of the scientific world are now beginning to accept the possibility of 'over 100% efficiency', this, in turn, has now also spilled over into using the terms of 'unity', 'beyond unity', 'negative energy', 'zero point', etc. These terms do not necessarily apply because here, in fact, is just where reality comes into the act. For instance, if we have a machine or device displaying an input of 100 watts and an output of 500 watts, this equals 500%. This is so, but it only indicates the degree of performance calculated at the end of the day. The shattering truth of the matter is that the device is not necessarily operating in the realm of 'unity', let alone over unity, zero point, negative time, etc. However, a machine or device that "measures" over 100% and displays energy "growth" effects, with "time", which are "additive" and "accumulative", then this is "not" conventional science, but science of another dimension - this isUNITY! So, therefore, a machine or device which does not display the aforegoing effects, is not a unity or over unity device, as is too often claimed. This kind of evidence outlined above is, in my knowledge of science, the "only" method by which the violation of the Law of Conservation can be proven. Ever expanding energy, akin to the now proven and accepted evidence of the Expansion of the Universe.

ON THE MATTER OF EXCESS HEAT MANIFESTATION

The permanent magnet rotor of the Adams Machine is of the only type of its kind in the world and, due to its unusual materials and their geometric placements, the rotor of the Adams Machine remains cool and, at most, rises only three to five degrees Celsius above ambient under full load! The rare earth magnets of the rotor are therefore protected from destruction due to excessive heat which would be inevitable in a very short period of time in a, for instance, large version of the Faraday Machine, and others I could mention. Faraday was brilliant in that he well knew the disadvantages and problems to be faced in attempting to put the discovery of this puny quantity of energy to work, by simply discarding it as a useless oddity, where it should have remained. Time has proven that hundreds of people worldwide have attempted to construct a viable Faraday machine and have all failed to prove excess energy presence, except for TeWari and Inomatu, who still have the problem of harnessing the high current efficiently without the use of lethal Mercury and the dispersement of excessive heat manifesting within the machine rotor.

THE ENERGY METAMORPHOSIS

It is my confirmed opinion that we are now into a major revolution in science and technology. New systems are almost a daily occurrence, major breakthroughs are coming on stream at a very fast pace and on a regular basis. Such are some of the breakthroughs that their effects on our civilisation will defy description. Superluminal energy production that is clean, economical and safer is now here.

The sooner people learn that the genius of man is, in reality, the genius of our Creator and it is unlimited, the better it will be for mankind. To believe otherwise is to state that our Creator's genius is limited. Our Creator's genius is not limited - it is the false teachings of physics bandied out by the mind of man in our Universities and Colleges alike that is limited. The laws of physics, as they stand today, are little but convenient assumptions ("if it works, leave it alone" kind of thinking), where true science (progressive science) abides by the Laws of Nature. This is why we humans are fully capable of applying the Laws of Nature to physics in our new dimension of thought, but still appear reluctant to deprogram when it comes to the orthodox and almost religious dogmas of past and sacrosanct principles of man-made scientific notions. Our Universe is negentropically organised and is proceeding transfinitely from disorder to order. It was until recent times it was accepted wisdom that the sun revolved around the earth and your life depended upon believing it!

In the original text there are references, too.